Offer asset tracking and fleet management
Three out of ten engines run on stolen fuel. How did Neotecnik decide to stop this problem?
Create flexible solutions for field personnel
Track and digitize sales force operations
Program and manage all fleet maintenance and generate budgets without the need for additional personnel
Discover the top 20 solutions and tools for tracking, security, and end customers
Discover how a virtual copilot in MDT terminals meets safety regulations and optimizes operations
How efficient cold chain control drastically reduces losses and damages to goods?
Offer tracking and task digitization for workers
One of the most critical activities in logistics management is asset control...
Partners is the platform for RedGPS clients and distributors from which they can manage all...
Three out of ten engines run on stolen fuel. How did Neotecnik decide to stop this problem?
With the right tools and guidance, migration represents an improvement in the service you provide to your customers and strengthens your position against the competition
The Gosafe GTU300 is a GPS device designed to provide tracking and monitoring capabilities for medium and large fleets.
With a compact design providing LTE CAT-1/2G connectivity, Bluetooth 4.2, 1-Wire interface, support for dual cards and in addition to supporting multiple sensors for temperature monitoring, CANBUS connectivity and BLE sensors.
Manufacturer | Model | Type | I/O | Battery | Communication Methods |
---|---|---|---|---|---|
Gosafe | GTU300 | GPS | 2/3 | Yes- Backup battery | LTE/GPRS y TCP/UDP/SMS |
Communication modes: LTE/GPRS and TCP/UDP/SMS.
Location technology: 56 GNSS channels.
Operating voltage: Systems for 12 and 24 volt vehicles. p>
Data support: TCP, UDP, SMS.
LTE CAT-1:< /strong> B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28/66.
GSM/3G: 850 /900/1800/1900 Mhz.
LTE Power: Class 5 (20 dBm).
GSM/GPRS Reserve: GPRS Class 10.
LTE data rate: 5 Mbps UL/10 Mbps DL.
SIM card: 1.8/3.3 V.< /p>
Operating voltage: 9-40 VDC operating for 12 V and 24 V.
Power consumption: 400 uA at 12 V (deep sleep), 3 mA at 12 V (sleep), 60 mA at 12 V (power save), 120 mA at 12 V (active tracking).
Backup battery: LI-ON 220 mAh, The battery recharge range is from 0 to +45°C.
Operating temperature: -40 ~ +85°C (without backup battery), - 10 ~ +60°C (with backup battery).
Humidity: 95%RH @ 50°C without condensation.
Shocks and vibrations : US Military Standards 202G and 810F, SAE, J1455.
EMC/EMI: SAE J1113; FCC–Part 15B.
RoHS: Classification.
IP compatible: IPX2.
Multi GNSS Engine, GPS/Glonass/Galileo/BeiDou, GPS/QZSS L1 C/A, Glonass L10F, BeiDou B1, Galileo E1 B/C, SBAS L1 C/A: WAAS, EGNOS , MSAS, GAGAN.
Concurrent GNSS: 3.
Accuracy: SBAS 2.0 m, Open Sky.< /p>
Tracking sensitivity: -167 dBm.
Antenna: Internal patch.
GPS assistance : Compatible.
Ignition sensor: 1 Fixed polarization .
Digital inputs: 2 High/Low 0-30 VDC.
Digital outputs: 3 Relay open collector 150 mA.
Serial interface: 1 (RS232).
Speaker: 1 (RX/TX).
< strong>MIC: 1 (2.5mm audio jack), 1- Cable interface: 1 (controller ID/temperature sensor).
Power output: 5V power output.
BlE 4.2: for wireless sensor.
Dimensions: 92 (length) x 67.5 (width) x 22 (height) mm.
Weight: ;85 g.
Connector type: 16 Molex connector PIN.
Micro USB: 1 Micro USB (configuration/debugging).
GPS Antenna: Internal.< br />Cellular antenna: Internal.
SIM access: Internal (4FF) or e-SIM integrated in PCB.
CPU: ARM Cortex M3.
Flash memory: 8 Mbit.< br />3D accelerometer: Integrated.
CE, E-Mark, FCC (in process) .